Start a new topic

Boss 1500m

I've never used Boss for any of my installs just because I was told it was a cheap product and waste of money. I bought a Boss Armor 1500M to push 2 kicker comp 12's. Based on the specs of the amp it should push this 12's no problem. Can someone shed some light on this before I go through the process of wiring up the subs.
1 Comment

Hello,


There is 3 different ways to wire these subwoofers to the AR1500M. This amplifier is only a max 2 ohm stable amplifier so I have included 3 diagrams below on how you can wire them up depending on the impedance of your speakers and whether they are dual or single voice coil.




Option 2 (series/parallel) = 4 ohm load
Voice coils wired in series, speakers wired in parallel 


           Two 4 ohm DVC Speakers = 4 ohm load


Option 2 (series/parallel) = 2 ohm load
Voice coils wired in series, speakers wired in parallel 
           Two 2 ohm DVC Speakers = 2 ohm load


Option 1 (parallel) = 2 ohm load
Speakers wired in parallel 
           Two 4 ohm SVC Speakers = 2 ohm load

Login or Signup to post a comment